50MHz Function / Arbitrary Waveform Generator

3400A 50MHz Function / Arbitrary Waveform Generator

Features: 1, 50 MHz Sine, 25 MHz Square & 10 MHz arbitrary Waveforms 2, 14-bit, 125 MSa/s, 256 K-point Arbitrary Waveform 3, Pulse, Ramp, Triangle, Noise & DC Waveforms 4, Linear & Logarithmic Sweeps & Burst Operation 5, AM, FM, PM (PSK), FSK & PWM Modulation Types 6, Amplitude Range, 20 mVpp to 20 Vpp into Open Circuit 7, Remote Control via USB, LAN or Opt. GPIB 8, Graph Mode for Visual Verification of Signal Settings 9, 16-bit Data Output via Pattern Out 10, Free Waveform Editor Software Wavepatt 11, User Friendly Operation

Great Performance for Functions and Waveforms 3400A 50MHz Function / Arbitrary Waveform Generator can create stable, precise, clean and low distortion sine waves by using DDS (Direct Digital Synthesis) Technology. With fast rise and fall times up to 25 MHz for square waves and 200KHz for linear ramp waves, the 3400A also can reach users demand on waveforms.

Pulse Generation 3400A can generate variable-edge-time pulses up to 10MHz. With variable period, pulse width and amplitude the 3400A is perfectly suited to applications requiring a flexible pulse signal.

Custom Waveform Generation 3400A can generate complex custom waveforms. With 14-bit resolution, and 125 MSa/s sampling rate, the 3400A offers users the flexibility to create waveforms. It also allows users to store up to 5 waveforms, 4 (4 x 256K Points) in nonvolatile memory and 1 in volatile memory.

User Friendly Operation The front-panel operation of 3400A is simple and user friendly. Users can enter all functions with a single key or two, and use knob or numeric keypad to adjust frequency, amplitude, offset and other parameters. Otherwise, users can also directly input voltage values in Vpp, Vrms, dBm or high & low levels. Timing parameters can be entered in Hertz (Hz) or second.

Easy-to-use Functions Users can easily use the following functions.

Internal modulations of AM, FM, PM (PSK), FSK & PWM for waveform adjustment. Built-in linear and logarithmic sweeps from 1ms to 500 s. The burst mode has a selectable number of cycles per period of time. Using remote control via USB, LAN or Opt. GPIB interface. The programmability by SCPI commands under the remote control connection. Precise phase adjustments and calibrations can be done from the front panel or via a PC.